-
GL691超低溫鋼絲編織液壓橡膠軟管GL691 氐溫鋼絲編織液壓橡膠軟管 ER LOW TEMPERATURE RESISTANT WIRE BRAID [RAULIC RUBBER HOSE 于超低溫下使用的石油基液壓油，溫度使用范 齪-100匕 由耐超低溫性特好的，具有良好耐油性的特種 橡膠內膠，鋼絲編織增強層，耐超低溫性特好 具有良好耐天候性的特種復合橡膠外膠組成。 .ICATIONS: For delivery of petroleum base tulic oil within a temperature range of -55t；-1 OOt； URE: This hose consist of an innertube made of jmperature resistant and oil resistant special )r compound, a wire braid reinforcement and a cover made of low temperature resistant and oil tant special rubber compound.
-
GL689 SAE 100R19 緊湊型28Mpa大工作壓力1和2層鋼絲增強橡膠軟管GL689 SAE 100R19 緊湊型28Mpa最大工作壓力4和2層鋼絲增強橡膠軟管 COMPACT ONE/TWO WIRE BRAIDS REINFORCED HYDRAULIC RUBBER HOSE(MAX. WORKING PRESSURE: 28MPA) 結構： 軟管由一層耐油合成橡膠內膠層、按軟管設計1或 2層編織層)的鋼絲增強和一層耐油和耐天候的合成 橡膠外膠層組成。 應用： 適用于使用石油基液壓油，溫度范圍為-40°C~ +100°C(-40°F~+212°F)的軟管。 CONSTRUCTION： This hose shall consist of " inner tube of oil resistant synthetic rubber, a steel wire braid reinforcement (one or two braids, according to hose desig n), and an oil and weather resista nt synthetic rubber cover A ply or braid of suitable material may be used over the inner tube and / or over the wire reinforcement to anchor the synthetic rubber onto the wire. APPLICATIONS： This section covers hose for use with petroleum base hydraulic fluids within a temperature range of-40°C ?+100°C(-40°F~+212°F).
-
GL688 SAE 100R17 緊湊型21Mpa大工作壓力1和2層鋼絲增強橡膠軟管GL688 SAE 100R17 奏型21 Mpm最大工作壓力1和2層鋼絲增強橡膠軟管 MPACT ONE/TWO WIRE BRAIDS REINFORCED HYDRAULIC BBER HOSE(MAX. WORKING PRESSURE: 21 MPA) 當構： l管由一層耐油合成橡膠內膠層、按軟管設計1或 曇編織層)的鋼絲增強和一層耐油和耐天候的合成 2膠外膠層組成。 Z用： i用于使用石油基液壓油，溫度范圍為-40°C~ 1 oo°c (-40°F ~+212°F)的軟管。 ISTRUCTION： This hose shall consist of an inner > of oil resistant synthetic rubber steel wire braid forcement according to hose design(one or two ds), and an oil and weather resistant synthetic )er cover A ply or braid of suitable material may used over the inner tube and / or over the wire forcement to anchor the synthetic rubber to the a LICATIONS： This section covers hose for use with oleum base hydraulic fluids within a temperature je of-40°C ~ + 100°C(-40°F?+212°F).
-
GL687 SAE 100R16 緊湊型高壓1和2鋼絲纏繞增強橡膠軟管GL687 SAE 100R16 緊湊型高壓1和2層鋼絲纏繞增強橡膠軟管 緊; COMPACT HIGH PRESSURE, ONE/TWO STEEL WIRE BRAIDS REINFORCED HYDRAULIC RUBBER HOSE CO RUI 結構： 軟管由一層耐油合成橡膠內膠層，按軟管設計(1或 2層編織)的鋼絲増強層和一層耐天候合成橡膠外膠 層組成。 應用： 適用于使用石油基液壓油，溫度范圍一409?+1219 (-40°F ?+250°F)軟管。 2J CONSTRUCTION： This hose shall consist of an inner tube of oil resistant synthetic rubber, one or two steel wire braids reinforcement, and an oil and weather resista nt synthetic rubber cover, a ply or braid of suitable material may be used over the inner tube and / or over the wire reinforcement to anchor the synthetic rubber to the wire. APPLICATIONS： This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -4(Tc ?+121?c(-40°F ?+250°F).
-
GL686 MT98 礦用大口徑鋼絲編織橡膠軟管給力液壓 f GL686 98礦用大口徑鋼絲編織橡膠 GE SIZE WIRE BRAID HYDRAULIC RUBBER HOSE 余: I于使用石油基液壓油，溫度范圍-40°C?+100°C 0°F?+212°F）的軟管。 生： J由一層耐油合成橡膠內膠層、（一層或二層）鋼絲 ［層和一層耐油、耐天候合成橡膠外膠層組成。 CATIONS： This section covers hose for use sum base hydraulic fluids within a temperature range 9 ?+10(Tc (—40°F ?+212°F). JRE： This hose shall consist of an inner tube of oil mt synthetic rubber , one or two steel wire braids cement and an oil and weather resista nt syn thetic rubber
-
GL685 MT98 礦用鋼絲編織橡膠軟管給力液壓 ? GELEE HYDRAULICS 空f GL685 MT98礦用鋼絲編織橡膠軟管 WIRE BRAID HYDRAULIC RUBBER HOSE FOR MINING 用途： 適用于煤礦液壓支架，綜合采煤機組等液壓系統輸送礦物油，水 基液壓油或水，可在-40°C~+100(-40°F~+212°F)使用。 特性： 用耐油和耐天候良好的特種橡膠制造，采用鍍銅鋼絲增強，外觀為 黑色光面或黑色的布紋。軟管執行MT98-2006標準。 APPLICATIONS： For delivery of water, mineral oil or water—based hydraulic oil in the hydraulic system of mining machinery and construction machinery and Working temperature range is within—40*C ~ +100?c(-40°F ?+212°F). FEATURE: Made of excellent oil resistant and anti—aging rubber, The reinforcement is braided with brass plated steel wire available in black with corrugeted or smooth finish. The hose is made in coformity with MT/T98-2006.
-
GL684 耐熱油鋼絲編織橡膠軟管GL684 油鋼絲編織橡膠軟管 )IL RESISTANT WIRE BRAID HYDRAULIC RUBBER HOSE 翻送液壓流體和水性流體。 旳耐天候良好的特種橡膠制造，采用鍍銅鋼絲編織增強，外觀 布紋。軟管執行SAE J517 100RIAT/R2AT標準。DIN EN853 Q標準，工作溫度一40°C ~+135°C (-40°F ~+275°F)。 CHONS： For delivery of the same hydraulic liquids or water— ]uids. ：：Made of excellent oil—resistant and anti—aging rubber, The corrrugated finish, the hose is made in conformity with standard 7 100R1AT and 100R2AT and DIN EN853 1SN and 2SN.Working :ure range is within
-
GL683 EN857 SC 鋼絲編織橡膠軟管鋼絲編織橡膠軟管 WIRE BRAID HYDRAULIC RUBBER HOSE 用途： 適用于輸送液壓流體和水性流體。 特性： 用耐油和耐天候良好的特種橡膠制造，采用鍍銅鋼絲增強，外觀 為黑色布紋或黑色光面。軟管執行D1NEN857標準，工作溫度 -40X)~+100
